With the rapid development of the construction industry, rebar as an important building material, its processing machinery operating procedures and safety are more and more attention from inside and outside the industry. Today, we will be on the rebar machinery operating procedures and safety, operation precautions for a comprehensive interpretation, in order to ensure that the staff in the operation process of safety and efficiency.

First, rebar machinery operating procedures

Rebar straightening machine operation: when using the steel straightening machine, first ensure that the straightening machine is installed smoothly, the material frame material groove is straight and aligned with the guide cylinder, straightening cylinder and the centre line of the lower knife cutting hole. According to the diameter of the straightening steel bar, choose the appropriate straightening block and speed, especially when straightening short than 2m or diameter greater than 9mm steel bar, should be low speed. At the same time, in the straightening block is not fixed, the protective cover is not covered before the rebar shall not be worn, is strictly prohibited to wear gloves to operate.

Steel bar cutting machine operation: before cutting off the rebar, must check the cutter cutter installed correctly, no cracks in the blade, the knife frame bolts are tight, the protective cover is secure. Steel bar cutting should be carried out after straightening, and hold the steel bar tightly when cutting material. In the process of cutting off, the distance between the hand and the knife shall not be less than 15cm, in order to prevent accidents.

Rebar bending machine operation: before operation, should ensure that the worktable and bending work plate table to maintain the level, check the mandrel, forming shaft, retaining iron shaft, variable retaining frame and other components without cracks or damage, protective cover, plate firmly. In the operation process, be familiar with the direction of the directional switch to control the direction of rotation of the working disc, to ensure that the placement of rebar and blocking frame, the direction of rotation of the working disc to match.

Second, safety and operation precautions

Equipment safety inspection: before operation, the equipment should be comprehensive safety inspection to ensure that the equipment appearance is intact, no abnormal wear and tear, cracks and other damages, the connection of all parts and components is firm, the power supply is normal and so on.

Familiar with the operating procedures: Before using the equipment, you should read the operating manual carefully to understand the working principle of the equipment and the correct operation method to ensure the safety and efficiency of the operation.

Wear protective equipment: operators should wear labour protective clothing, safety helmets, safety glasses, protective gloves, etc. that meet the standard to prevent accidental injuries.

Remove debris: Before processing, debris around the equipment should be removed to ensure that the working area of the equipment is neat and clean, and to avoid debris interfering with the normal operation of the equipment.

Pay attention to the position and angle of the steel bar: when cutting and bending the steel bar, make sure the position and angle of the steel bar are correct to ensure the processing quality. At the same time, be careful with the operation to prevent accidents such as de-welding and breaking of steel bars.

Avoid overloading: steel processing machinery has a certain working load limit, overloading will make the performance of the equipment decline, which will easily lead to equipment failure or even damage. Therefore, in the operation process should be in accordance with the load requirements of the equipment to operate, avoid overload work.

Regular maintenance and repair: regular maintenance and repair of steel processing machinery is an important measure to ensure the safety and normal use of equipment. Through regular maintenance and repair, the service life of the equipment can be extended and the occurrence of failures and accidents can be reduced.

In short, the operating procedures and safety and operation precautions of steel reinforcement machinery are important to ensure the safe operation of the staff. We hope that the majority of construction industry practitioners can strictly abide by the relevant regulations to ensure production safety.